- First use: Long press the X Button for 10 seconds. After the first 5 seconds, you will hear the ON
sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by flashing the power indicator red and blue - Switch on Bluetooth on your device
- Choose “SACKit Touch 200” under Bluetooth settings on your device. Your headphones are now
- connected with your device
- Start playing music on your device
- Long press the X button to turn off your SACKit Touch 200 headphones
- SACKit Touch 200 will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise connecting opportunity won’t appear on the new device.
- Operation instructions for use after first pairing
After first time pairing your SACKit Touch 200 headphones and your Bluetooth device will be connected automatically - Bluetooth device will automatically reconnect, the LED light will blink blue once SACKit Touch 200 is successfully paired.
- Turn the headphones on by holding down the X button until you hear the ON sound
- Long press X button to turn off SACKit Touch 200
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing
Bluetooth Multipoint
SACKit Touch 200 comes with the Bluetooth Multipoint feature. This means that up to two devices
can be connected to the headphones at the same time. This enables you to for example connect the
headphones to a computer and a smartphone at the same time. To switch between the two devices,
just pause the music/sound on one device and press play on the other. If your phone rings, the SACKit
Touch 200 will automatically jump on the phone.
To connect a second Bluetooth device after a first one is already connected:
- Turn off the SACKit Touch 200
- Then long press the X Button for 10 seconds. After the first 5 seconds, you will hear the ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by flashing the
power indicator red and blue - Switch on Bluetooth on your new device
- Choose “SACKit Touch 200” under Bluetooth settings on your device. Your headphones are now connected with your new device