Simply remove your ROCKit S / SACKit Rock 100 earbuds from the charging case or long press the X button on your earbuds for 10 seconds. After the first 5 seconds, you will hear the ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by flashing red and white LED lights
Please keep the earbuds and Bluetooth device in range of 1 meter when pairing and make sure ROCKit S / SACKit Rock 100 is turned on
Go into the Bluetooth settings on your device and search for new Bluetooth devices and select ROCKit S / SACKit Rock 100
The LED light will blink white once ROCKit S / SACKit Rock 100 is successfully paired
Long press X button on the earbuds to turn off your ROCKit S / SACKit Rock 100 earbuds
ROCKit S / SACKit Rock 100 can remember 8 devices: You can pair 8 units with your Rock 100, at 9th unit ROCKit S / SACKit Rock 100 will forget the first connected
Operation instructions for use after first pairing
After first time pairing your ROCKit S / SACKit Rock 100 earbuds and Bluetooth device will automatically reconnect
Turn the earbuds on by holding down the X button until you hear the ON sound or by removing the earbuds from the case